Single To Three-Phase Converters
Booster converters for single or multiple machines with single or multiple motors.
Boosters for machines with VFDs, for CNC machines and for welders.
A Booster knows when one of the connected motors starts and support this motor with high inrush currents until this motor reaches full speed.
Versions C and T also monitor the voltage symmetry and balance these voltages for sensitive machines like CNC or inverters.
CMOS, thyristors, capacitors and a generator motor.
Manufacturers of converters: CMOS-thyristor controllers are available.
-
Booster E
No voltage balancing.
Output voltage can be + 9% at no load and -9% at full load.This is acceptable for machines with motors under average loads.
It detects a starting motor and generates high start currents until this motor runs at full speed.
Motors and machines start fast.Supply can be 240V single or 415V two-phase.
Booster E3 for 3kW, Booster E4 for 4kW, Booster E6 for 6kW and Booster E8 for 8kW. -
Booster C
Booster C with two stage voltage balancing (+ - 6%) for machines, pumps and welders.
It detects a starting motor and generates up to 500% start currents until a motor has reached full speed, motors and machines start fast.Booster C4 for up to 4kW, Booster C8 for up to 8kW.
Supply voltage can be 240V single or 415V two-phase or 480V split-phase, please specify. -
Booster T
Eight stage fine voltage balancing.
Three-phase voltage symmetry is better + - 4% for CNC machines, VFDs, inverters, welders, pumps and motors under high loads.
A Booster detects a starting load motor and generates motor start currents until this motor has reached full speed. Motors and machines start fast.Supply can be 240V single- or 480V split-phase.
Three-phase output is 415V.Booster T for 8kW, 12kW, 16kW, 24kW, 32kW, 40kW.