Eurotech _{Super conductors}

A Booster converter can supply many machines, regardless of their control system. Select a Booster converter with the kW output of at least 20% greater than the load. A Booster recognises starting machines and generates the starting currents so that a machine starts as quickly as if it were connected to the three-phase mains.

The Booster is already one of the best converters in the world. For CNC machines, we have developed the even better MultiPhase. Not only does it detect starting machines and generate the right currents to accelerate them quickly. It also keeps the output voltages precisely balanced for all loads. This is essential for CNC and all other inverters.

The output voltage is 230V, not 400V. A motor in a machine must be dual voltage.

Use an N or R converter to power a small machine.
A motor in a machine is part of the conversion. The motor shaft power is slightly reduced.

* A machine must not have push buttons, e.g. tyre changers, dust extractors, sanders.
* The motor power must be in the range 0.25kW - 3kW.
* Motor and converter kW ratings must match.

* Type N has an AU/NZ style three phase output socket 56SO416.
* Type R has a world standard IEC/IEEE 16A 4 pole output socket.